Viconics VT8600 Series, User Interface Manual

Page: 31 / 96

31
Viconics Technologies Inc. www.viconics.com | sales@viconics.com | Tel: (514) 321-5660 | Fax: (514) 321-4150
028-0427-11 October 2018
CONFIGURATION 3/11
PARAMETER DETAILS
Configuration Parameters Default Value Significance and Adjustments
Standby time
Default:
0.5 hours
Standby Time
Time between the moment where the PIR cover detects last movement in the area,
and the time which the Room Controller stand-by setpoints become active.
Note : This parameter is not active when the “Door” function is used (wired or
wireless).
Range
: 0.5 to 24.0 hours (0.5 hour increments)
Unocc. time
Default:
0.0 hours
Unoccupied Time
Time between the moment where the Room Controller toggles to stand-by mode, and
the time which the Room Controller unoccupied mode and setpoints become active.
Note: Default value of 0.0 hours disables the unoccupied timer. This prevents the
Room Controller from being able to switch from stand-by mode to unoccupied mode
when PIR functions are used.
Range : 0.0 to 24.0 hours (0.5 hour increments)
Temp. occ. time
Default value: 2 hours
Temporary Occupancy Time
The time the Room Controller stays in override mode before reverting back to
unoccupied mode. When the Room Controller is in unoccupied mode, pressing
the on-screen Override icon or closing the contact on UI17, configured as “Remote
Override”, sets the Room Controller to Override mode for defined time period, and
uses the Occupied Cooling and Heating setpoints.
Range: 0.0 to 24.0 hours
3/11 Configuration
Temp. occ. time
Unocc. time
Standby time
2.0 hrs
0.0 hrs
0.5 hrs
Deh. lockout
Deh. hysteresis
Disabled
5 %RH
Temp. sensor Wired