Driving on the road
96
Preparing the
machine to be
transported
Mount lighting and warning signs, if applicable.
Check all folding parts and their locking devices.
•
hopper cover,
•
border spreading plate.
Set all parts of the machine and the tractor, especially the PTO
shaft, the hydraulics, the wheels and the electric system, to
transport mode.
Check the weight distribution between front and rear axles.
Mount front weights, if necessary.
Check the headroom of the combination.
Lower the power lift, if necessary.
Lock the control lever of the power lift while moving so that the
machine is not lowered by accident.
Check if the lights are in good working order.
Check whether the dosing units are closed.
Remove dirt that could fall off while on the road. A dirty road could
be hazardous for other drivers.
Control devices, e.g. ropes, hoses, etc. for remote actuation of
devices such as cylinders, shall be guided and positioned in a way
they never inadvertently release nor block desired movements/
actuations!
Always ensure adequate lateral securing of a mounted machine in
transport position.
Summary of Contents for RO-C 1400
Page 4: ...Table of contents 4...
Page 139: ...Maintenance 139 109 mm Rope Discharge bushing Position V Mechanical...
Page 153: ...Notes 153 Notes...
