Vicon RO-C 1400 User Manual Download Page 6

Page: 6 / 157

Preface

Meaning of symbols

Various symbols are used to provide a clear understanding of the text..

These are explained below

•

A dot is placed before lists.



A triangle marks tasks you have to perform.

→

An arrow refers to a different place in the text.

In addition, we use pictograms to help you easily find certain text

sections.

NDICATION

The words “Tip“ and “Hint” are followed by tips or hints for operation.

The warning triangle indicates important safety instructions. Failing to

comply with these may result in:

•

serious operating malfunctions of the machine;

•

damage to the machine;

•

injuries or accidents.

The spanner indicates tips for assembly or adjustment work.



A star indicates that examples will follow that are intended to clarify the

text.

All directional rotations are to be interpreted when facing in direction

of travel.

Summary of Contents for RO-C 1400






























































































































































Search results

Summary of Contents for RO-C 1400

Reviews:

Vicon RO-C 1400, User Manual, Page: 6 / 157

Search results

Summary of Contents for RO-C 1400

Reviews: