Maintenance
123
Maintenance
Repair damage safely and without delay
Repair the machine safely before you continue with work:
•
place the tractor and machine on a firm, straight surface,
•
switching off the PTO shaft,
•
releasing the pressure from the hydraulic system,
•
switch the tractor off and remove the key from the ignition,
•
engage the parking brake of the tractor,
•
disconnect the tractor if possible,
•
wait until all parts have stopped moving. The mass (inertia) could
keep the machine running for a bit!
•
wear protective clothing, such as safety gloves and shoes,
•
carefully follow the instructions given,
•
use the correct tools,
•
bigger or heavier parts must be locked and secured to lifting gear
when being replaced,
•
parts that could move unintentionally must be supported and
secured,
•
do not climb on parts of the machine that are not in use. Only use
stepladders, ladders or other tools intended for this purpose.
•
disconnect the feed while working on the electric system.
•
disconnect the cables from the battery and the dynamo before arc
welding on the tractor or the connected machine!
Performed by an authorised person
Always have an authorised expert perform maintenance and repairs
as prescribed in, as prescribed in
→
paragraph »Authorisation« on page 12.
All forms of responsibility of the manufacturer become null and void
and the guarantee lapses if maintenance and repair work are
performed by an unauthorised person.
Do not modify the machine
Do not modify the machine in any way. Unauthorised modifications
may impair the function and/or safety and affect the life of the
machine.
Only use original parts when replacing
Using other non-genuine parts could lead to problems and unsafe
situations when using the machine.
Summary of Contents for RO-C 1400
Page 4: ...Table of contents 4...
Page 139: ...Maintenance 139 109 mm Rope Discharge bushing Position V Mechanical...
Page 153: ...Notes 153 Notes...
