To be done before spreading
94
Review and adaptation
The maximum acceptable loss in the ditch is determined by
environment standards (EN 13739-1). In order to comply with the
standards the quantity of fertiliser in the 1st trough, standing in the
imaginative ditch, must be a maximum of 10% of the quantity collected
in the trough in the middle of the track (= 100%).
The trough on the land next to the fictive ditch provides an insight into
the topping. It will never be 100%.
A
Good spreading pattern, the tramline cylinder has been
adjusted well.
B
The spreader is not spreading wide enough.
Let the tramline cylinder slide in a few centimetres
before opening the hydraulic control valve. Do not
increase the PTO shaft rpm!
Repeat the test
C
The spreader is spreading too wide.
Decrease the PTO shaft rpm with 50 rpm.
Repeat the test
A
B
C
tramline cylinder
Summary of Contents for RO-C 1400
Page 4: ...Table of contents 4...
Page 139: ...Maintenance 139 109 mm Rope Discharge bushing Position V Mechanical...
Page 153: ...Notes 153 Notes...
