Use in the field
104
You will find the correct working method and corresponding distances
on the headland in
→
the next paragraph »Working method on the headland« and
paragraph »Set tramlines« from page 101.
Drive to the next tramline and re-open the dosing units at the right
time, as displayed in the next paragraph »Working method on the
headland«.
In the event of spreader failure or stoppage:
Stop spreading immediately!
Disconnect the PTO shaft immediately!
→
See then paragraph »Failure and stoppage« on page 114.
I
NDICATION
There can be an increase or a decrease in traction due to different soil
conditions. This will have an influence on the driving speed and
therefore also the application rate (kg/ha).
Working method on the
headland
The way you have to stop and turn at the headland depends on the
way you spread the border
•
boundary track spreading from the sprayer tramline (with tramline
cylinder) and one-sided boundary spreading with extra gait, or
•
one-sided boundary spreading by closing off one disc and using
the border spreading plate.
Do the following when spreading the headland:
Summary of Contents for RO-C 1400
Page 4: ...Table of contents 4...
Page 139: ...Maintenance 139 109 mm Rope Discharge bushing Position V Mechanical...
Page 153: ...Notes 153 Notes...