Before first use
35
Vanes
Two vane combinations, as illustrated in the diagram, must be used for
different working widths.
Vane position on the disc
Hook the small vanes in the first and third positions. See the
illustration above.
Next install the medium-size and largest vanes.
Press the vanes in well and put the lock nut in position.
Mount the vanes on the other side of the spreading disc and on the
other spreading disc in the same manner. Place vanes of equal
length across from each other. See the illustration given above.
Fasten the lock nuts (50NM).
Working width (m)
Vane combination
9-12
135-185
15-18
185-235
20-21
See spreading chart
Lock nut
Vane
Summary of Contents for RO-C 1400
Page 4: ...Table of contents 4...
Page 139: ...Maintenance 139 109 mm Rope Discharge bushing Position V Mechanical...
Page 153: ...Notes 153 Notes...