Chapter 2
Xgig1000 System Setup
Unpacking the System
Page 80
Xgig1000 Hardware Guide
March 2017
Unpacking the System
Inspect Xgig1000 system packaging and its contents for visible damage. If you notice any
damage, please contact the
team immediately.
When you receive your Xgig1000 system, the package will contain the following items:
•
Xgig1000 chassis
•
Xgig System Server Software USB Drive
•
USB A recovery boot drive
•
100-120 V Power cord
•
RJ-45 straight-through cable
•
DB-9 Null modem cable
•
USB cable (Type A connector to Type B connector)
•
Warranty
•
Rack mounts and mounting screws
•
Replacement screws for removal of rubber feet for rack mount
Please check the contents of your Xgig1000 system package to make certain you have
received all the components on this list. If any items are missing, please contact the
team immediately.
Customers that do not have access to a 100
−
120V power supply will need to supply their
own power cord.
The Xgig chassis should only be serviced by Viavi or an authorized Viavi service provider.
Customers should not attempt to service the product. The printed circuit board assemblies
internal to the chassis contain batteries assemblies.
Locating the System in Your Environment
Place your Xgig1000 system in a location where you have easy access to the following:
•
Physical connection to your local area network
•
A socket outlet supplying 110
−
115V power (or 200
−
240V for international).
The socket outlet shall be installed near the equipment and shall be easily accessible.
Surge protection should be provided between the Xgig1000 chassis and the power supply.
If you want to rack-mount your Xgig1000 system, follow the instructions below. If you want
a bench setup, you don’t need to do anything to the chassis.
CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of used Batteries
according to the instructions of the battery manufacturer.
