Chapter 1
Xgig1000 System Overview
Xgig1000 8 Port 25G/32G Chassis
March 2017
Xgig1000 Hardware Guide
Page 63
Xgig1000 8 Port 25G/32G Chassis
The Xgig1000 8 Port 25G/32G system is a fixed blade chassis that houses one
Xgig 25G/32G blade with eight SFP ports (four links). The Xgig1000 8 Port 25G/32G
system supports:
•
Gigabit Ethernet protocol:
Analyzer and Jammer functions at 10GigE (10.3125 Gbps) and 25GigE (25.78125
Gbps) using the eight SFP ports. Analyzer is supported in Analog Passthrough and
Digital Retime modes. Jammer is supported in Digital Retime mode only. The capture
buffer size is approximately 32 GB for each SFP port.
Each Gigabit Ethernet speed (10G and 25G) requires a separate license.
•
Fibre Channel protocol:
Analyzer and Jammer functions at 8G (8.5 Gbps), 16G (14.025 Gbps), or 32G (28.05
Gbps) using the eight SFP ports. Analyzer is supported in Analog Passthrough and
Digital Retime modes. Jammer is supported in Digital Retime mode only. The capture
buffer size is approximately 32 GB for each SFP port.
Analog Passthrough mode requires separate adapters. The 8 SFP ports require Analog
Passthrough Adapters. Refer to
“Analog Passthrough Adapters” on page 138
for informa-
tion on these adapters.
The Xgig1000 8 Port 25G/32G chassis is shown in
NOTE
This fixed-blade system does not require or accept Xgig or Xgig5000 blades.
Xgig provides the necessary software tools running in a PC environment to perform
the application task using the blade fixed within the chassis.
