Viavi ONX-220 User Manual Download Page 47

Page: 47 / 212

ONX-220 User's Guide

22135173, Rev. 000

June 2020

Chapter

2 Utilities

Establishing a Bluetooth connection

The Bluetooth® option allows communication with a paired mobile device or .

Enabling Bluetooth connectivity

Before you establish a connection to Bluetooth device, you must enable Bluetooth

connectivity on your instrument.

1. Go to the

Tray

menu.

2. Press the

Bluetooth

icon. The icon will be green when connectivity is enabled.

NOTE:
The Bluetooth and WiFi interfaces cannot be ON at the same

time.

NOTE:
For more detail on using your meter with the VIAVI Mobile

Tech app, see

Connecting to StrataSync from the Mobile Tech

App on page 154

Connecting to a Bluetooth device

You can establish a connection to any Bluetooth device that is within range of your

instrument, and for which you have authorized access.

1. Go to the

System Settings

menu, then select

Bluetooth

. The Bluetooth Settings

menu appears.

2. Press the box next to

Enabled

. A checkmark appears.

3. Press

Scan for devices

. The instrument scans for Bluetooth devices, then lists the

devices on the menu.

4. Select the device to connect to.

If the instrument successfully authenticates to the device, a message appears

indicating that pairing was successful.

If the instrument does not successfully authenticate to the device, a message

appears indicating that pairing failed.

If pairing was successful, you can use the instrument with the paired device.

Summary of Contents for ONX-220





















































































































































































































Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands

Viavi ONX-220, User Manual

Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands