Viavi ONX-220 User Manual Download Page 53

Page: 53 / 212

ONX-220 User's Guide

22135173, Rev. 000

June 2020

Chapter

2 Utilities

IP address of ONX or gateway starts with 192.168.0

Syncing to StrataSync server for an upgrade or running a DOCSIS test with this IP

address has a higher chance of failure. The ONX uses this address internally which may

cause the data to be delivered to an incorrect device.

There are two recommended solutions to this situation:

Reconfigure the router to any other IP address grouping. For example 192.168.1.* or

10.0.0.*.

Perform the update via USB.

Viewing hardware/software versions and options

The following procedure describes how to view the status of available options and the

hardware and software versions for your instrument.

1. Go to the

System Settings

menu.

2. Do one of the following:

To review hardware and software versions, select

Hardware/ Software

Revisions

The revisions of the internal components and the

software versions appear. The instrument’s unique

unit ID number also appears on this screen. You will

need the unit ID if you are adding options.

To review the status of available options, select

Software

Hardware Options

A list of available options appears with the status for

each option (Enabled or Upgradeable).

Summary of Contents for ONX-220





















































































































































































































Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands

Viavi ONX-220, User Manual

Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands