Viavi ONX-220 User Manual Download Page 126

Page: 126 / 212

ONX-220 User's Guide

22135173, Rev. 000

June 2020

126

Chapter

9 Configuring the OneExpert with StrataSync

Off-Air Ingress Band

Each Ingress band to be tested has five fields to specify:

Label

Start frequency

Stop frequency

Limit

Limit type

For each item a value can be entered that defines the ingress interferers to be tested.
To add or delete Off-Air Ingress bands from the list. Use the green (+) or red (-) buttons.

Viewing, Editing, Renaming, or Deleting an Off-Air Ingress Plan

1. Check the box in front of the desired Off-Air Ingress

Plan.

2. Select the

Action

button above the left side of the list

pane. The Actions dropdown appears.

3. Select

View, Edit, Rename,

Delete

from the

dropdown list and change or confirm from the

following screen.

Saving Off-Air Ingress Plan

When all values have been entered, select

Save

Summary of Contents for ONX-220





















































































































































































































Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands

Viavi ONX-220, User Manual

Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands