Viavi ONX-220 User Manual Download Page 139

Page: 139 / 212

ONX-220 User's Guide

22135173, Rev. 000

June 2020

139

Chapter

9 Configuring the OneExpert with StrataSync

Digital Measurement Settings

The Digital Measurement Settings include the following fields:

Lock extended BER settings

BER multiplier

OneCheck Extended BER (will slow OneCheck)

ChannelCheck Extended BER (will slow OneCheck)

Lower uncertainty threshold

Extended BER testing dwell multiplier

Extended BER testing with uncertainty band

For some items, a value can be entered that corresponds to the limits of that

measurement at that location.

Viewing, Editing, Renaming, or Digital Measurement Settings

1. Check the box in front of the desired Digital

Measurement Settings.

2. Select the

Action

button above the left side of the list

pane. The Actions dropdown appears.

3. Select

View, Edit, Rename,

Delete

from the

dropdown list and change or confirm from the

following screen.

SavingDigital Measurement Settings

When all values have been entered, select

Save

Summary of Contents for ONX-220





















































































































































































































Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands

Viavi ONX-220, User Manual

Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands