Viavi ONX-220 User Manual Download Page 168

Page: 168 / 212

ONX-220 User's Guide

22135173, Rev. 000

June 2020

168

Chapter

10 Using the OneExpert with a Mobile Device

2. Select the purple share arrow to the right of the

file you want to send. A pop-up will appear with

the following options:

Export to another app

Deploy to OneExpert

Upload to StrataSync

To return to the Main menu at any time, select

Back

in the upper left.

3. Choose the option you want. To export to another

app, choose the app you want from the pop-

up. The file will also be deployed or uploaded to

StrataSync, if selected.

To delete a file, select the file and swipe to

the left. Then select

Delete

Purple

share

arrow

ONX-220

Summary of Contents for ONX-220





















































































































































































































Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands

Viavi ONX-220, User Manual

Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands