Viavi CX300 ComXpert, Operation Manual, Page: 60 / 256

Chapter 2 Getting Started: Setup and Operation
Screen Layout
Rev. 001 CX300 ComXpert Operation Manual 22130634
2 - 14 February, 2022
2.7.2 Main Display Area
• The contents of the main display area will be updated according to the selected
system or test function. The layout and contents of this area are described in
detail in the following sections:
•
Chapter 3 “System Settings Screens” , provides descriptions of all system
functions and system screen controls and settings.
•
Chapter 5 “Test and Measurement Functions” , provides descriptions of standard
CX300 test and measurement functions.
GNSS Button
The GNSS button is displayed on the Device
Toolbar
when GNSS is enabled on the test set.
Pressing the GNSS button accesses GNSS
controls and settings.
See section 3.1.14, “GNSS Screen”, on page
3-20 for detailed information about this function.
See section 4.5, “Setting up GNSS”, on page
4-12 for instructions to configure the test set for
GNSS connection.
WiFi Button
The
WiFi button
is displayed on the System
Toolbar when WiFi functionality has been
enabled on the
Network screen
.
• The indicator is red when WiFi is enabled,
but a WiFi connection has not been
established.
•
The indicator is green when the CX300
has established a WiFi connection.
See section 3.1.4.2, “WiFi Controls and
Settings”, on page 3-8 for detailed information
about this function. See section 4.9.3.2, “WiFi
Connection”, on page 4-17 for instructions to
connect the CX300 to a WiFi network.
Audio Button
The Audio button accesses CX300 audio
controls. See section 3.1.12, “Audio Screen”, on
page 3-19 for detailed information about this
function.
Power Indicator
The Power Indicator button accesses and
displays information about the test set’s power
usage configuration and the battery charge
state. See section 3.1.5, “Power Management
Screen”, on page 3-9 for more information.
Table 2-3 Device Toolbar Controls and Indicators (Continued)
Button Name Description