Chapter 4
Configuring System Settings
Establishing a Network Connection
22130634
CX300 ComXpert Operation Manual
Rev. 001
4.4.1.2.2 IPv4 Network Mode Settings
When all settings have been configured, select the
Network On/Off soft-key
to enable
network connectivity. The device establishes an Ethernet connection to the LAN.
IPv4 Address Mode
Setting
DHCP
No additional settings.
Static
IPv4 Address
•
Enter the device’s IP address (which will be used
when accessing the provider network).
IPv4 Netmask
•
Enter the netmask address to indicate whether
the packets are to be routed to other networks or
subnetworks.
IPv4 Gateway
•
Enter the address for the gateway that is used to
route packets that are not on the same subnet.
IPv4 DNS Server
•
Enter the address of the DNS server.
Shared
Share the IP from another interface (for multi
interface mode).