Viavi CX300 ComXpert, Operation Manual, Page: 65 / 256

Chapter 2 Getting Started: Setup and Operation
Operating and Navigating the User Interface
22130634 CX300 ComXpert Operation Manual Rev. 001
The Numeric Slider contains the following controls:
Figure 2-6 Numeric Slider
Table 2-6 Numeric Slider Controls
Control Name Description
Pin Button
When the Pin button is enabled (blue), the
Numeric Slider remains open after the Apply
button is pressed.
Close Button
The Close button closes the Numeric Slider . Any
changes that have not been applied will be lost
when the Close button is pressed.
Slider Bar
The Slider Bar is used to adjust the value inside
the bounding box. The Slider Bar adjusts the
value in large increments; use the Increment
Up/Decrement Down Arrow buttons to adjust
the value in smaller increments.
Cancel Button
The Cancel button terminates an edit that has not
yet been applied.
Left / Right
Arrow Button
Pressing the Left Arrow decreases the size of the
bounding box, moving the right edge one place to
the left each time the button is pressed.
Pressing the
Right Arrow
Increases the size of
the bounding box, moving the right edge one place
to the right each time the button is pressed.
Increment Up /
Decrement Down
Buttons
The Increment Up button increases the last
digit selected in the bounding box by one each
time the button is pressed.
The
Decrement Down button decreases the
last digit selected in the bounding box by one
each time the button is pressed.