Chapter 4
Configuring System Settings
Using Smart Access Anywhere
22130634
CX300 ComXpert Operation Manual
Rev. 001
4.9.5 Smart Access Utility - Viewing the CX300 UI
After the Smart Access utility has been launched, you can view the CX300 user interface
(UI) on the external device’s display.
To View the CX300 UI Remotely
1.
Select
Remote screen
from the utility’s Introduction page.
2.
The CX300 UI appears on the external device’s display.
3.
The
VNC button
located in the CX300
Device Toolbar
indicates that the remote
screen is active.
4.9.6 Transferring Files with Smart Access
A file can be transfered to and from the external device and the CX300.
To Transfer Files using Smart Access
1.
Select
Remote screen
from the utility’s Introduction page.
2.
A two-paned window appears, showing the PC or mobile device directories (or
storage devices) in one pane, and the CX300 directories (or storage devices) in
the other pane.
3.
In the “source” pane (the pane that has the file that you want to transfer), select
the directory or storage device, then select the file to be transferred.
4.
In the “destination” pane (the pane with the directory that you want to transfer the
file to), select the destination directory for the file.
5.
Select one of the following:
•
To transfer a file from an external device to the CX300, select
Upload
.
•
To transfer a file from the CX300 to an external device, select
Download
.
6.
A dialog box appears asking you to verify the destination that was selected for
the transferred file. Press the
OK
button
to confirm the selection.
7.
Press the
Save
button
to transfer the file.
A message will appear at the bottom of the screen providing details concerning the status
of the file transfer. After the transfer is complete, the message disappears and the
transferred file is underlined in the workstation or instrument’s file manager.
NOTE
Files cannot be transferred in multiples; files must be transferred one at a time.