Chapter 3
System Settings Screens
System Settings Screens
22130634
CX300 ComXpert Operation Manual
Rev. 001
The
Date and Time screen
contains the following controls and settings:
Table 3-9 Date and Time Controls and Settings
Control/Setting
Description
Date and Time Button
Time Zone
Region
Selects the continent in which the country is located.
Country
Selects the country to be used to define date and time
settings.
Area
Selects the geographical areas located within the
selected country (when applicable).
Date and Time
Set clock
automatically
This check box is used to synchronize the test set’s
date and time with the clock of an NTP server.
When the test set has successfully synchronized with
an NTP Server, the screen updates to show status.
NTP Server “X”
These fields are enabled when the
Set clock
automatically
check box is selected. The fields are
used to define the primary and secondary NTP Server
that the test set uses to synchronize time and date
settings.
Clock Controls
The clock controls are used to manually set the test
set’s clock. These controls are not active when the Set
clock automatically check box is selected.
Use 24-hour time
When this check box is selected, time is displayed in
24 hour format hh:mm:ss. This setting is not available or
active when the Set clock automatically check box is
selected.
Calendar Controls
The calendar controls are used to manually set the test
set’s date. These controls are not active when the Set
clock automatically check box is selected.
