Chapter 3
System Settings Screens
System Settings Screens
Rev. 001
CX300 ComXpert Operation Manual
22130634
3 - 8
February, 2022
3.1.4.2 WiFi Controls and Settings
The following controls and settings are used to establish a WiFi connection.
3.1.4.3 Network Certificates
Digital certificates certify the ownership of a public key by the named subject of the
certificate. This allows others to rely upon the digital signature, to verify the owner of a
server is trustworthy, and that the server is secure. Trusted certificates can be used to
create secure connections to a server, without worry that by accessing the server a user
will be exposing themselves to a malicious party on the server network.
The CX300’s
Certificate tab
is used to manage the test set’s digital certificates.
Table 3-6 WiFi Controls and Settings
Control/Setting
Description
Enable Wireless
Adapter
This check box is used to enable the CX300’s WiFi function.
When WiFi is enabled, the test set initiates a network
search for other devices on the wireless network.
WiFi Address List
This list shows all devices on the network that are within
range of the test set. A lock icon next to a device indicates a
secure network. When a secure network is selected, a
settings window is displayed, to allow entering the
information necessary to access the selected WiFi network.
MAC Address
This is the MAC (Media Access Control) Address of the
CX300’s Network Interface Card (NIC).
Status
This field indicates the CX300’s WiFi connectivity status.
•
Disabled
•
WiFi connectivity is turned off.
•
Disconnected
•
WiFi connectivity is turned ON, but the test set
is not connected to a WiFi network.
•
Connected
•
The test set is connected to a WiFi network.
