VET-PRO
Operator’s Manual
29
.
During program operation, the pump
will display the rate in which the
program is operating.
Rate
250 ml/h
Note
:
-If one of the values is changed during the programming
mode, the pump will not store the new value, unless changes
are confirmed by pressing the
START/OK
key.
-If the flush key is activated during data setting, the pump
will return to the original (previous) screen, once flushing is
completed.
Resume Press OK
In the event the program is in lock mode or if
the time option is on and the previous program
has been interrupted the pump will display the
Repeat/Resume screen.
C
O
N
T
Repeat Press NO
To
continue
the previous program (from where it stopped) press the
START/OK
key.
To
repeat
the previous program from the beginning,
or start a new
program
(if pump is not in lock mode) press the
STOP/NO
key.
Volume over Time
Volume 456 ml
C
O
N
T
Press OK key
1.
If time option is on (adjust setting –
see p. 60) after displaying program
name and status, pump will display
last set volume, set or confirm the
displayed number by pressing the
START/OK
key.
Total Time 10:30
2.
C
O
N
T
Press OK key
The display will show the time
screen, set the time,
for a volume
over time program
, and press
START/OK
to start operation.
Setting Program Delay– Refer to
page 48
