© Vestamatic GmbH
Subject to modifications!
- 41 -
Art.
-N
r.:
84
50
060
1
K
1•
V
est
amatic G
m
bH • Do
hr
w
eg
27 •
D
-41
066 M
önc
he
ngladb
ach •
www.v
est
amatic.
co
m
Information for the user – Basic settings detail 2/3
Basic settings, page 2
Basic settings detail 2/3
On this page you can program the LAN connection, display the
logbook, view contact information or query the software version
of the display and control box.
=
network settings
(without function)
= display logbook
= display contact information
= display software version and serial number
= to page 3 of the basic settings or back to page 1
Press
to return to the user menu.
Block 1, page 1
Network settings
(without function)
In this menu you can set the IP address for the network
connection. The 4 blocks of 3-digit numbers can be entered
one after the other. Use buttons and to alter the IP block
data.
Press
to go to blocks 2 to 4.
Press
for the previous menu.
Press
to return to page 2 of the basic settings.
I
NOTE!
After the network settings have been changed, the control box is reset. This results in the
connected systems receiving a close command.
Display logbook
The control system’s logbook records all sensor-related fault
reports and alarm signals. Safety-related changes are also
stored. Use buttons and to view the various logbook
entries.
Press
for the previous menu.
Press
to return to page 2 of the basic settings.
I
NOTE!
The logbook may only be deleted by the manufacturer. All entries are stored electronically
and will not be lost even in the event of a power failure or if the control box’s battery is
removed.
