© Vestamatic GmbH
Subject to modifications!
- 32 -
Art.
-N
r.:
84
50
060
1
K
1•
V
est
amatic G
m
bH • Do
hr
w
eg
27 •
D
-41
066 M
önc
he
ngladb
ach •
www.v
est
amatic.
co
m
Information for the installer – Installation assistant (Wizard)
I
NOTE!
The symbol appears if no corresponding sensor has been assigned. As soon as the
corresponding sensor is activated, the symbol
appears, marking the sensor con-
cerned. This feature is
not
available for the type selection and .
Lux sensor assignment
This menu enables you to assign one or more lux sensors to
the particular channel group. Click the appropriate lux sensor to
activate it. The symbol
is displayed over the appropriate
sensor to confirm its activation.
Press
to go to page 2 of the current menu.
Press
to return to the menu on the sensor selection of
connected sensor devices.
Press
for the next menu.
Page 1 = Lux sensor selection 1 to 4
Page 2 = Lux sensor selection 5 to 8
Ä
WARNING!
For safety reasons, you may ONLY activate the wind sensor and select the
corresponding wind sensor types from this menu. For the same reasons, both wind
sensors are enabled in the default settings. If one of the wind sensors is not connected
to the Touch Centre, or neither of them is connected, the corresponding wind sensor
must be explicitly disabled in the “Wind sensor assignment” menu. See also connection
examples p. 16 “Connection without wind sensor”. It is not permitted to have different
types of wind sensors or other manufacturers’ wind sensors connected at the same
time. This may cause serious personal injury or damage to property.
Wind sensor assignment
This menu enables you to assign one or more wind sensors to
the particular channel group. Click the appropriate wind sensor
to activate/deactivate it. The symbol
is displayed over the
appropriate sensor to confirm its activation. Use the buttons
and to set the wind threshold in km/h or m/s.
Press for the previous menu, Press
for the next menu.
Wind sensor type setting
In this menu you can set the wind sensor type to be used.
The following wind sensor types can be set using the buttons
and .
Type WM1 = WS XS,
Art.-no. 01100310
Type WM1 =
WS XS Alu,
Art.-no. 01100410
Type WM2 = WS Classic M,
Art.-no. 01100235
Press
for the previous menu.
Press
to return to the menu “Sensor Select”.
