© Vestamatic GmbH
Subject to modifications!
- 58 -
Art.
-N
r.:
84
50
060
1
K
1•
V
est
amatic G
m
bH • Do
hr
w
eg
27 •
D
-41
066 M
önc
he
ngladb
ach •
www.v
est
amatic.
co
m
Information for the user – Fine adjustments detail 3/5
Page 3
Fine adjustments detail 3/5
On this page you can perform fine adjustments to the following
functions:
= MC DZ M/J function
= inching mode function
= holiday function
= astro function
= to page 4 of the fine adjustments or back to page 1.
Press
to return to the user menu.
Function may only be activated
for the following control types
= awnings
= roller shutters
= blinds
MC DZ M/J function
Ä
WARNING!
This menu is password-protected for security rea-
sons. You will find the 4-digit security code on the
invoice for the control system! The security code
is ONLY intended for use by professional instal-
lers and may not be passed on to end users as
this will enable end users to turn off safety-
related settings.
This may cause serious personal injury or
damage to property!
The MC DZ M/J function is used exclusively for controlling the decentralised controls MC DZ M/J, MC P1,
MC P2 and MC P4 in operating modes 4, 5 and 6. Before this function can be activated you must first
enter a 4-digit security code. See details of the password input menu on page 29.
I
NOTE!
When the MC DZ M/J function is active, it will switch off all motor runtimes and tilting
times for that channel group. The runtimes and tilting times need to be set on the
decentralised controls MC DZ M/J, MC P1, MC P2 and MC P4.
Inching mode function
If this function has been activated ( ), an inching mode of up
to 2 seconds is enabled. This means that the runtime command
is not executed for 2 seconds. Press the symbol to activate
the function.
Function may only be activated for the following control types
= blinds