© Vestamatic GmbH
Subject to modifications!
- 54 -
Art.
-N
r.:
84
50
060
1
K
1•
V
est
amatic G
m
bH • Do
hr
w
eg
27 •
D
-41
066 M
önc
he
ngladb
ach •
www.v
est
amatic.
co
m
Information for the user – Fine adjustments detail 2/5
Page 2
Fine adjustments detail 2/5
On this page you can perform fine adjustments to the following
functions:
= motor runtime, general
= tilting function, general
= continuous up command
= continuous down command
= to page 3 of the fine adjustments or back to page 1.
Press
to return to the user menu.
Motor run time
I
NOTE!
If the MC DZ M/J function is activated, it will not be
possible to program the motor runtime, tilting and
inching mode functions. In that case, these functions
will be marked with a grey .
In this menu, you can set a general motor runtime for extension
or opening. By operating buttons and the desired motor
run time can be set in seconds.
Function may only be activated for the following control types
= awnings
= blinds
= roller shutters
= skylights
Programmable range for shutters/skylights: 3 – 120 seconds
Programmable range for awning/blinds:
3 – 180 seconds
Press or to return to the detail 2/5 menu.
Tilting function
In this menu, you can set a tilting time.
It is depending on the selected tilting types
Tilting time “Season”
or
Tilting time “Table”
and the related functions. Setting each tilting time depends on
the size and construction of the sunshade. The time can be
adjusted in increments of 100 ms. At the end of the motor run-
time, the sunshade moves in the opposite direction (retracts) to
enable the slats to be positioned to the correct angle. The tilt
function is performed in both automatic and manual operation
mode, depending on setting.