© Vestamatic GmbH
Subject to modifications!
- 35 -
Art.
-N
r.:
84
50
060
1
K
1•
V
est
amatic G
m
bH • Do
hr
w
eg
27 •
D
-41
066 M
önc
he
ngladb
ach •
www.v
est
amatic.
co
m
Information for the user – General notes
General notes
The Touch Centre is a microprocessor-controlled central control for different products such as blinds,
awnings, shutters, skylights, ventilation systems, heating and lighting. The connected sunshade, lighting,
ventilation or heating systems are centrally controlled according to sun intensity, wind speed, precipita-
tion and time. All settings, safety-related changes, fault reports and alarm signals are stored electroni-
cally in the logbook.
General notes on touchscreen displays
I
NOTE!
Please note that the touchscreen is extremely sensitive. Pressing the screen too hard,
scratching it or using a sharp object will cause irreparable damage to the screen. There-
fore, do not use a pointed or sharp object to touch the screen. Only clean the display using
special cleaning wipes or a soft glasses cloth. The display can be locked when cleaning
(see section Lock display, page 36).
Operating modes and control
While in automatic operation mode, the connected products will be operated fully automatically,
depending on wind, sun, rain, temperature, time and fire alarm. While in manual operation mode, all
safety functions will continue to operate. Only sun, temperature and time-dependent controls are
switched off in this mode.
The individual channel groups, the operating mode of the selected group as well as the date and time
are shown clearly on the display. Similarly, sensor information and status messages relating to the
individual channel groups can also be queried.
Manual control
Before a channel group can be changed from automatic control to manual control, the channel group
must first be activated. Touch the group to activate it. An active group is shown by the symbol
. Press
the auto symbol
to change the group to manual control. This is indicated by the hand symbol
in
the top right-hand corner of the display.
Display of operation mode
“Automatic control“
Display of operation mode
“Manual control“
Manual control of sunshades/skylights
Press up
to retract sunshades/open skylights.
Press down
to extend sunshades/close skylights.
To stop the sunshade/skylight while it is moving, simply press the opposite button.
Manual control of lighting/heating/ventilation
Lighting, heating or ventilation
Press
to switch on,
Button
means switched on.
Lighting, heating or ventilation
Press
to switch off,
Button means switched off.
