© Vestamatic GmbH
Subject to modifications!
- 30 -
Art.
-N
r.:
84
50
060
1
K
1•
V
est
amatic G
m
bH • Do
hr
w
eg
27 •
D
-41
066 M
önc
he
ngladb
ach •
www.v
est
amatic.
co
m
Information for the installer – Installation assistant (Wizard)
Communication mode recognition
Communication mode recognition (Install)
In this menu the connection between the control box and
display box is displayed.
= connection via 4-wire interface
=
radio connection
(without function)
= no connection
= low signal strength
= sufficient signal strength
= good signal strength
Press
to return to the language setting menu.
Press
to go to the next menu to scan the connected
sensor devices.
Scanning connected sensor devices
In this menu all the connected and operational sensors are
checked and displayed.
= Lux sensor LS 30
= Wind sensor WM1 or WM2
= Temperature sensor internal and/or TS Pro XL
=
DCF radio-controlled clock receiver
= Thermostat TE Indoor or TE Outdoor
= Rain sensor RD +1°C or RD -20°C
See
note
below.
Press
to return to the communication mode recognition menu.
Press
for the next menu “Type select”.
I
NOTE!
The rain sensor and the thermostat are not recognised automatically. If these sensors are
installed, each sensor must be activated manually. To do this, touch the appropriate
symbol so that the symbol
appears over the appropriate sensor.
