manualshive.com logo in svg

VeEX RXT-6400, User Manual

Share
Download
VeEX RXT-6400 User Manual Download Page 86

5.7 Autoscripting

Autoscripting runs BERT and Throughput test profiles in succession. Profiles are configured from the test application or ReVeal

software.

Autoscripting - BERT Setup

Autoscripting Setup

File Prefix:

 Prefix added to name of test results. The default prefix is "Autoscript."

If Alarm/Error detected: 

Choose to 

Continue

 or 

Exit

 testing if an alarm/error is detected.

Profile:

 Select Default, Last Configuration, or None.

Testing duration can be set for seconds, minutes, hours, or days.

Tap on 

View Setup 

to view test setup parameters. Setup cannot be configured from this menu.

Tap on the green 

Start

 button to begin Autoscripting.

The soft LED light indicates the status of finished tests:

Green:

 No error or alarm was detected.

Red:

 An error or alarm was detected.

Starting the test brings up the BERT/Throughput Results tab. Test status is displayed in green on the bottom of the screen. When

testing finishes, results are automatically saved. Refer to 

File Management

 in the 

TX300S, MTTplus, RXT-1200, or UX400

platform manuals 

for information on accessing saved results.

Autoscripting - BERT Results

Autoscripting - Saving Results

RXT-6400_Module_Manual

Page 86 of 119

Summary of Contents for RXT-6400
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands