manualshive.com logo in svg

VeEX RXT-6400, User Manual

Share
Download
VeEX RXT-6400 User Manual Download Page 20

DHCP:

 PASS indicates that an IP address has successfully been assigned.

IP:

 PASS indicates that the IP address assigned has been verified to be unique in the network.

Gateway:

 PASS indicates that the gateway IP address is valid.

DNS:

 PASS indicates that the DNS IP address is valid.

Go back to top

 

Go back to TOC

 5.2.2 Trace Route

Trace Route is a common method used to find the route to the destination IP address or URL. Refer to 

Trace Route

 in the 

TX300S,

MTTplus, RXT-1200, or UX400 platform manuals

 for more information on this feature including setup and results.

Go back to top

 

Go back to TOC

 5.2.3 ARP Wiz

ARP Wiz uses the Address Resolution Protocol (ARP) to verify the status of each IP address in a user-selectable IP range. It is the

standard method for finding a host's hardware address when only its network layer address is known. Refer to 

ARP Wiz

 in the

TX300S, MTTplus, RXT-1200, or UX400 platform manuals

 for more information on this feature including setup and results.

Go back to top

 

Go back to TOC

 5.2.4 Ping

Ping is a popular computer network tool used to test whether a particular host is reachable across an IP network. A ping is

performed by sending an echo request or ICMP (Internet Control Message Protocol) to the echo response replies. Refer to 

Ping

TX300S, MTTplus, RXT-1200, or UX400 platform manuals

 for more information on this feature including setup and results.

Go back to top

 

Go back to TOC

 

 

RXT-6400_Module_Manual

Page 20 of 119

Summary of Contents for RXT-6400
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands