Loss of Signal (LOS) and the Saturation level for optical signals are shown graphically including the level measurement in dBm.
Throughput Results - Global Signal (Page 1)
Signal (Page 2)
Page 2 displays the Optical module (transceivers) information which includes Vendor name, Part Number and Optical Wavelength.
Tap on the
Decode
button to view additional information on SFP optics.
Signal (Page 3)
The received signal frequency and offset is measured and performed on the optical interface (transceivers).
Current:
Indicates the frequency of the input signal.
Offset:
Indicates the difference between the standard rate and the rate of the input signal.
Min (ppm):
Indicates the difference between the standard rate and the minimum deviation detected in the input signal.
Max (ppm):
Indicates the difference between the standard rate and the maximum deviation detected in the input signal.
The
Global Errors
screen displays the Current and Total error count of all streams:
Sync Header Error
Block Type Error
FCS/CRC:
Number of received frames with an invalid Frame Check Sequence (FCS)
IP Checksum:
Invalid IP Frame Check sequence
TCP/UDP Checksum
(Layer 4 only)
Jabber frames:
Number of received frames larger than 1518 bytes containing an invalid FCS
Runt frames:
Number of received frames smaller than 64 bytes containing an invalid FCS
Giant frames
(Advanced Monitoring - Pass Through Results only):
Number of received frames larger than 1518 bytes
Throughput Results - Global Errors
RXT-6400_Module_Manual
Page 76 of 119
