CIR Test Configuration
CIR Test Config.:
Select Simple Test, Step Load Test, or Simple and Step.
Simple Test:
Starts the tests at the CIR.
Step Load Test:
Starts the test below the CIR and continues in steps until it reaches the CIR.
Simple and Step Load Test:
Step Load Test performs only if the Simple Validation test fails.
Tap on the
Test Duration
box to input a test duration (test duration must be less than 999 sec).
Tap on the
table
to modify the CIR value percentage for each step.
CIR Test Config
5.5.1.1 Header Settings
Service #:
Select a service to configure
Service Name:
Assign a name to the service if desired.
Frame Size Type:
Fixed or EMIX (1GE only). A fixed frame size is chosen as default
Frame Size:
For Fixed Traffic Flow:
Input a fixed frame size within the range of 64-10000 bytes by tapping the value box.
For EMIX (1GE only):
The default value is abceg. Tap the zoom (magnifying glass) icon to define other values. Select
the values from the drop down lists on the next screen.
Any EMIX configuration of 5 frames is allowed.
Encapsulation Type:
None, Provider Backbone Bridge (PBB-TE), or Multiprotocol Label Switching (MPLS-TP). MPLS-TP is
a simplified version of MPLS. Provider Backbone Bridge MAC-in-MAC (IEEE 802.1ah) encapsulation are configured trunks
RXT-6400_Module_Manual
Page 57 of 119
