IP Tab:
In the IP tab the user must configure the destination IP address and source address. The user may also configure the
following IP header fields:
IP Type:
IPv4
IP Src and IP Dest:
For IP Src, if the IP connection is up, refer to
Chapter 7_Tools> IP
Tools. The source address is fixed to the IP address from the IP setup menu.
IP TOS (for Quality of Service testing):
Legacy TOS (Precedence):
The first three bits of the IP TOS field can be edited:
000 - Best Effort
001 - Bulk Data
010 - Transactional
011 - Call Signaling
100 - Streaming Video
101 - Voice
110 - Routing
111 - Reserve
DSCP (Differentiated Services Code Point):
The first six bits of the IP TOS can be edited to provide more
granular service classification.
For more information on the definition of DSCP field in IPv4 and IPv6 headers, refer to
.
Time To Live (TTL):
Configurable in the range 0 to 255.
Fragment offset byte:
Configurable in the range 0 to 65.528.
The fragment offset field, measured in units of eight-byte blocks, is 13 bits long and specifies the offset of a
particular fragment relative to the beginning of the original unfragmented IP datagram.
Protocol field:
UDP (0x11), TCP (0x06), User Defined.
BERT Setup - IP Address settings (Layer 3
)
RXT-6400_Module_Manual
Page 25 of 119
