manualshive.com logo in svg

VeEX RXT-6400, User Manual

Share
Download
VeEX RXT-6400 User Manual Download Page 53

benchmark the quality of the transceiver and/or PAM4 signal. KP4 FEC can only correct up to 15 symbol errors per codeword, so

rows 1 to 15 show the amount of correctable errors, based on how many bad symbols found in the received codeword. The closer

the numbers are to the top, the better the quality and performance of the link. Any codeword with more that 15 symbol error

becomes an uncorrectable FEC error and will affect the payload (Ethernet traffic), hence not counted on this screen.

RFC 2544 Results - FEC Skew

Go back to top

 

Go back to TOC

5.4.3 Saving RFC 2544 Results

Once the test has been stopped the results can be saved by pressing the 

Save

 key on the VePAL’s keypad. The results will be

saved and named automatically. Once the results are saved, the user may view or rename the results file by going to

 Utilities 

>

Files

 > 

Saved

. For more information on retrieving saved test results, refer to

 File Management 

in the 

TX300S, MTTplus, RXT-

1200, or UX400 platform manuals 

for more information.

Go back to top

 

Go back to TOC

RXT-6400_Module_Manual

Page 53 of 119

Summary of Contents for RXT-6400
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands