5.4.1 Setup - Standard Mode
Unless otherwise noted, the Frame Header and related setups are identical to the setups described in the
5.4.1.1 Header Settings
With the exception of the Data tab, RFC 2544 Header setup options are identical to the setups described in the BERT application.
section of the BERT application for more information.
RFC 2544 setup options are listed below:
Profile
Encapsulation Type
Test
Frame Type
MAC/IP
VLAN
MPLS:
MAC, VLAN, MPLS, IP, and Test Pattern Configurations:
MAC Header Tab
Data Tab: No payload selection is possible.
The payload area is populated with a VeEX signature field and other proprietary data.
RX Filter Tab
VLAN Tab
MPLS Tab
IP Tab
RFC 2544 Data tab
5.4.1.2 Frame Settings
Frames tab:
User configures the following:
Preset Frames:
User selects from a list of recommended test frame sizes defined in RFC 2544:
Test frames are 64, 128, 256, 512, 1024, 1280, and 1518 bytes.
The default selected frames are 64 and 1518 bytes.
To select/deselect any of the recommended test frames, check the box to the right of the desired frame.
When VLAN tagging or MPLS tagging is enabled, the value in parentheses reflects the actual frame size
transmitted.
For example one VLAN tag adds 4 bytes to the frame size, therefore a 64B frame becomes a 68 byte
frame.
Add frame:
The user can add two additional user configurable test frames of any size ranging from 64 bytes to 10000 bytes.
RXT-6400_Module_Manual
Page 39 of 119
