vds 69871-01, Operation & Maintenance Manual

Page: 26 / 93

Marquee ACON Ultra Installation/Operation Guide
2-3
•
Librarian
: Future Feature
•
Librarian, Upload
: Future Feature
•
Librarian, Download : Future Feature
•
Registry Backup
•
Registry Restore
•
Registry Refresh
•
Exit
: Exit the AU program.
NOTE: Once the AU program is closed, all remote control functions within the projector’s menu
structure relating to the AU operations are disabled.
2.2.2.2
Operation
menu:
NOTE: All functions under
Operation
will return the projector to its original state after the selected
function has been completed, i.e., if the projector was in “standby” when the function was
invoked, the projector will be returned to “standby” mode when completed.
•
Complete ACON Ultra : Performs both the automatic geometric and the convergence portions of
the AU operation. Same as the Main screen command button.
•
Geometry Correction
: Performs just the automatic geometric portion of the AU operation.
Same as the Main screen command button.
•
Convergence Correction : Performs just the automatic convergence portion of the AU
operation. Same as the Main screen command button.
•
Recall Last Good Geometry
: Use this function to load the geometry and convergence
settings of the projector, prior to the last AU controlled action ( i.e., undo the last AU correction
action). Same as the Main screen command button.
•
Focus/Stig : Performs both the automatic Stig and Focus portions of AU correction operations.
•
Abort Operation : This function can be used to stop the process of any one of the program
functions or routines.
2.2.2.3 Projectors menu: