3
Device description
Saved data
30
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
■ Saved data
► Driver card
In general, the driver card contains:
• Data identifying the driver.
After each vehicle operation, the follow-
ing data is stored on the driver card chip:
• Insertion and removal of the card
• Vehicles used
• Date and odometer reading
• Driver's activities, for normal driving
operation at least 28 days
• Kilometres travelled
• Country entries
• Status information (single or crew op-
eration)
• Occurred events/malfunctions
• Information concerning control activit-
ies
• Specific conditions:
– Journeys with status ferry/train
– Journeys with status
Out of
scope
If the chip memory is full, the DTCO 4.0
will overwrite the older data.
► Company card
In general, the company card contains:
• Data for identifying the company and
for authorising access to saved data
– Company
– Driver card
After each operation, the following data
is stored on the company card chip:
• Type of activity
– Registering/deregistering
– Downloading the data from the
data memory
– Downloading the data from the
driver card
• Period (from/to) for which the data
was downloaded
• Vehicle identification
• Identity of the driver card from which
the data was downloaded
If the chip memory is full, the DTCO 4.0
will overwrite the older data.
Obligations of the contractor [
► Mass memory (in the device)
• Over a period of at least
365 calendar days, the mass memory
collects and saves the data according
to Implementing Regulation
(EU) 2016/799 Annex I C, as
amended.
• The evaluation of activities is done in
intervals of one calendar minute,
whereby the DTCO 4.0 grades the
longest continuous activity per inter-
val.
• The DTCO 4.0 can store approx.
168 hours’ worth of speed values in
the resolution of one second. Each
second of the values are thus saved
exactly with date and time.
Service Only!