9
Explanation to the printouts
122
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
IMPORTANT
The shown printouts to the driver cards
show a case where first and second
generation driver cards are inserted
into the DTCO 4.0.
Special cases:
• If only a first generation driver card
is inserted for the printout, the daily
printout is carried out as in previous
versions of the DTCO, without the
identification GEN1 and GEN2.
• When printing out a second genera-
tion driver card in the DTCO 4.0 of a
day on which the cards were inser-
ted into a DTCO 3.0 or older, all
blocks are printed out, but are
empty. For the activities, the time
display is shown as
00:00
.
[2]
Type of printout:
•
24h
= Daily printout of
the driver card
•
!x
= Events/malfunctions
of the driver card
•
24h
= Daily printout of
the DTCO 4.0
•
!x
= Events/malfunctions
of the DTCO 4.0
•
= Speeding
The set value of the legally per-
mitted maximum speed set is
also printed.
•
= Technical data
•
= Driver activities
•
v
= v-diagram
Optional printouts:
•
D
= Status D1/D2 dia-
gram*
•
%v
= Speed profiles*
•
%n
= Rotation frequency
profiles*
* = Option
[3]
Information about the card-
holder of the inserted tacho-
graph card:
= Controller
= Driver
= Contractor
= Workshop/Inspection body
• Name
• First name
• Card identification
• Card valid until ...
• Generation of the tacho-
graph card (GEN1 or GEN2)
For non-personal tachograph
cards, the name of the control
body, the company or the work-
shop is printed instead of the
name.
[3a]
Information about the card-
holder of the other tachograph
card
[4]
Vehicle identification:
• Vehicle identification number
• Registering member state
and vehicle registration num-
ber
[5]
Identification of the tachograph:
Service Only!