5
Operation by the driver
Shift start – Inserting driver card
52
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
Indicating country at shift end
M 28.10.18 17:45
07.11.18 14:00
? end country
? end country
:D
Fig. 26:
Entry - End country
● In the first entry field
, select symbol
?
Select
End country
and
confirm.
This is only possible if the time of the
first manual entry does not corres-
pond with the time of the country entry
for the last card removal.
● Select and acknowledge the country.
Selecting the countries
When making another selection, the pre-
viously entered country is displayed first.
By pressing the buttons / the four
previously entered countries are dis-
played.
Symbol: Colon in front of the country
symbol
:B
The subsequent selection occurs in al-
phabetical order, starting with letter
A
:
• Button :
A, Z, Y, X,
… etc.
• Button :
A, B, C, D,
… etc.
IMPORTANT
By pressing and holding of button /
you can accelerate the selection (auto
repeat function).
► Aborting the entry procedure
If no entry occurs within 30 seconds, the
following display is shown:
please
enter
Fig. 27:
Entry prompt on the display
If within a further 30 seconds the button
is pressed, you can continue the entry.
Otherwise, or at the start of the journey,
the standard display
(a)
is shown in the
display.
Data already entered is discarded to en-
sure that only correct data and data con-
firmed by you is stored. This concerns
the remote entry and the direct entry on
the DTCO 4.0.
Requesting the card by pressing the
combination button
interrupts the
Manual entry
.
Service Only!
