6
Removing company card
Operation by the contractor
© Continental Automotive GmbH
69
Fig. 52:
Control printout
• The vehicle registration number is
shown again on the display – once
again allowing the option to amend
any mistakes:
confirm Veh.
entry? No
Fig. 53:
Selection to confirm
6. Check if the vehicle registration num-
ber on the printout is correct.
7. Using buttons / :
• to select
No
if the vehicle registra-
tion number is incorrect and con-
firm using button .
The display to step 1 is shown
again and you may repeat your
entries.
•
Yes
if the vehicle registration
number is correct and confirm us-
ing button .
The country symbol and the vehicle re-
gistration number are saved on the
DTCO 4.0.
If a change is required, e.g. due to a
change of location, contact an authorised
specialist workshop holding a workshop
card.
■ Removing company card
IMPORTANT
To protect the data of your company
and to prevent any misuse of the card
itself, you should not leave it inside the
vehicle.
You can only remove the company card
from the card drawer when the vehicle
is stationary.
IMPORTANT
To operate the ADR version, the igni-
tion must be switched on.
Please take note of the special safety
information for the operation of the
ADR version of the DTCO 4.0 in ex-
plosive environments.
Service Only!