3
Device description
Stand-by mode (display)
24
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
■ Stand-by mode (display)
In the operating mode
Operation
, re-
cognisable in the display by the picto-
gram
, the DTCO 4.0 switches to
Stand-by mode in the following circum-
stances:
• Ignition of the vehicle is off.
• There is no notification.
In case of
Ignition off
, the display is
dimmed.
After approx. 1 minute (customer-specific
value), the display turns off completely –
the DTCO 4.0 is in stand-by mode.
Optionally, an additional dimming value
can be set (workshop).
► Exiting stand-by mode
By pressing any button or
Ignition
on
, the stand-by mode is exited.
The display turns on again; no further ac-
tion occurs.
■ ADR version (Ex version)
The ADR version of the DTCO 4.0 is
marked with an ex symbol on the front
plate.
Fig. 3:
Ex symbol on the front
The ADR version of the DTCO 4.0 is au-
thorised for operation in explosive envir-
onments.
• Ex zone: Zone II
• Ambient temperature: -20 °C to
+65 °C.
► Special safety instructions
The following additional safety informa-
tion should be observed with the ADR
version of the DTCO 4.0:
RISK OF EXPLOSION!
Observe instructions
• Please observe the instructions for
the transport and handling of haz-
ardous goods in explosive environ-
ments.
Service Only!