9
Explanation to the printouts
128
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
[22]
Periods with activated remote
control:
•
= Start time
•
= End time
Recording is made separately
for driver 1 and driver 2. The
times of both drivers are indic-
ated on the printout, even when
they are the same.
[23]
Handwritten information:
•
= Location of the control
•
= Signature controller
•
= Start time
•
= End time
•
= Signature driver
[24]
Information about the card-
holder of the recorded profile:
• Last name of driver
• First name of driver
• Card identification
Missing information about the
cardholder means: no driver
card inserted in card drawer 1.
• Beginning of the profile re-
cording with date and time
• End of the profile recording
with date and time
New profiles are created:
• by inserting/removing a
tachograph card in card
drawer 1,
• by a day change,
• by a correction of the UTC
time
• By a voltage interruption.
[25]
Recording of speed profiles:
• List of the defined speed
ranges and period in this
range
• Area: 0 <=v< 1 = vehicle is
stationary
The speed profile is split into
16 zones. During installation,
the individual ranges can be ad-
justed individually.
[26]
Recording of rpm profiles:
List of defined engine rotation
frequency areas and period in
this area:
Area: 0 <=n< 1 = Engine off
Area: 3281 <=n< x = unlimited
The rotation frequency profile is
split into 16 zones. During in-
stallation, the individual ranges
can be adjusted individually.
[27]
Manufacturer-specific data:
• Version number of the soft-
ware upgrade module
(SWUM)
[28]
Number of the housing seal on
the DTCO 4.0
[29]
Recording of the activities:
• Legend of the symbols
Service Only!