8
Messages
Overview of possible operational notes
106
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
Message
Meaning
Measures
Ejection not
possible
Requesting the tachograph card will be rejected.
• because data might be read in or transferred,
• the driver card needs to be read-in again within the re-
gistration time of one minute,
• a daily change occurs after UTC time,
• the vehicle is moving,
• or with ADR versions, the ignition is switched off.
Wait until the DTCO 4.0 releases the
function or eliminate the cause: Stop the
vehicle or switch on the ignition.
Then request the tachograph card again.
?1 Record in-
consistent
There is an inconsistency in the order of the dates in the
data recorded on the driver card.
This message can be displayed until the
faulty records have been overwritten by
new data.
If the message is displayed permanently,
get the tachograph card checked.
c Eject card
An error occurred when writing data on the driver card.
While the card is ejected, a new attempt
is made to communicate with the card. If
this attempt also fails, a printout of the
last activities saved for this card is star-
ted.
1 Card faulty
An error has occurred when processing the inserted tacho-
graph card. The tachograph card is not accepted and is
ejected.
Clean the contacts of the tachograph
card and insert it again.
If the message is displayed again, check
if another tachograph card is read in cor-
rectly.
Service Only!