JACOB JENSEN 806
A
B
1. Use of the chronograph:
Press button “
A
“ to start the chronograph.
To stop, press button “
A
“ again.
By pressing button “
B
“ the chronograph will reset.
Split time scan be measured by pressing button
“
B
” while the chronograph is
running. The split time can then be read, when button
“
B
” is pressed again the
chronograph will return to the total lapsed time.
2. Setting the timers to zero:
By pulling out the crown completely, button “
A
” can be used to correct the
seconds counter.
Button “
B
” will correct the 1/10th seconds counter.
By pulling out the crown one step, button
“
B
” can be used to correct the
minutes counter. Turning the crown will change the date.
3. Hands and counters:
Upper left : the minutes counter
Upper right : the 1/10th seconds counter
Bottom : the seconds hand
Centre : the seconds counter
