8
Special messages
Messages
© Continental Automotive GmbH
97
IMPORTANT
Procedure in case of malfunctions
In case of a malfunction of the tacho-
graph, you as the driver are obliged to
record the details about activities which
the tachograph no longer correctly re-
cords or prints on a separate sheet or
on the back of the printout.
Recording activities manually [
Driving time warnings
• The message
Driving time
warning
warns the driver when he
exceeds the driving time.
• This message is displayed with flash-
ing background lighting and must be
confirmed by pressing the button .
Operational notes
The operating notes are displayed
without
flashing background lighting and
disappear (except for individual mes-
sages) automatically after 3 or
30 seconds.
DTCO 4.0-enabled display
instruments
If a display instrument is installed in the
vehicle which can communicate with the
DTCO 4.0, the function control
indic-
ates messages of the DTCO 4.0.
IMPORTANT
For detailed information, please read
the operating manual for your vehicle.
► Acknowledgement of messages
1. Press button . You have confirmed
the message and the background
lighting stops flashing.
2. Re-press the button . The message
disappears and the previously set
standard display is shown.
Notes:
An operating note disappears after
pressing the button for the first time.
If there are several messages, you must
confirm the messages one by one.
■ Special messages
► Production status
10:30 0km/h
56.7km
Fig. 116:
Standard display production status
If the DTCO 4.0 is not activated as the
control device, the
production
status
is displayed, symbol
(1)
.
The DTCO 4.0 accepts solely the work-
shop card.
IMPORTANT
Get an authorised specialist workshop
to put the DTCO 4.0 into operation
properly.
Service Only!