7
Second menu level – menu functions
Menus
© Continental Automotive GmbH
89
Changing settings to personal VDO
data
entry
driver 1
driver 1
? settings
? publish
VDO data
1 publish
ITS data? Yes
VDO data? no
Fig. 101:
Menu sequence entry - personal spe-
cial data
Inserting driver card for the first time
Activating remote control
entry
driver 1
driver 1
? settings
driver 1
R enable remote
R enable remote
entries? Yes
entries? no
R1 Pair your
device 12345678
Fig. 102:
Menu sequence entry - activating re-
mote control
Requirements:
• A DTCO
®
SmartLink (option) is at-
tached to the tachograph.
• A Bluetooth-enabled device creates a
link to the DTCO
®
SmartLink.
Proceed as follows to created a link
between the DTCO
®
SmartLink and your
terminal device:
1. The display of the DTCO 4.0 shows a
digit sequence (
step e
).
2. Insert this digit sequence into your
Bluetooth-enabled device.
Both devices are now linked and ready
for remote control.
IMPORTANT
When using the remote control, the
user is responsible for the legal com-
pleteness and correctness and recog-
nises this by using the remote control.
The use of the remote control is not
part of the legal tachograph system. It
is used on the operator's own respons-
ibility.
The periods during which a remote con-
trol was used, can be printed and dis-
played.