VDO DTCO 4.0, Instruction Manual

Page: 92 / 156

7
Menus Second menu level – menu functions
92
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
entry
 vehicle
 vehicle
$ licence code
$ licence code
12345678
Fig. 108: Menu sequence entry - licence code
IMPORTANT
If the licence code has already been
entered, it will be displayed in full and
cannot be changed.
In this case, the additional functions are
already activated.
IMPORTANT
The licence code can be purchased via
the VDO online shop.
è
VDO online shop [
}
146]
► Menu point display driver 1/
driver 2
You can use this menu point to display
the data of your inserted driver card.
IMPORTANT
Comparable to a printout, the data is
shown on the display, whereby one row
of the printout (24 characters) is shown
split in two rows.
 23.10.2018 14:
55 (UTC)
---------------
--------
Fig. 109: Example for the data display
If, during scrolling through the informa-
tion, you scroll back using buttons /
you can only call up approx. 20 previous
rows of the printout.
Use the button to leave the display.
Note:
• Calling up the functions to display the
data is identical with the ones for
printing the data. Therefore, they are
not described any further below.
• It is possible to call up every display in
local time.
printout in
UTC time yes
printout in
UTC time no
Fig. 110: No – printout in local time
● Select the possible displays for
driver 1 or driver 2 step by step.
Service Only!