5
Shift end – removing driver card
Operation by the driver
© Continental Automotive GmbH
55
■ Shift end – removing driver
card
IMPORTANT
To protect personal data, you should
remove your driver card at the end of
each shift.
You can only remove the driver card
when the vehicle is stationary.
IMPORTANT
To operate the ADR version, the igni-
tion must be switched on.
Please observe the special safety notes
for the operation of the ADR version in
explosive environments.
1. At the end of your shift (end of your
working day) or when changing
vehicles, set the corresponding activ-
ity, e.g. rest time
.
2. Press the button
for at least
2 seconds.
1 Maier
Fig. 31:
Transferring the shift data
The number of the card drawer and the
driver's surname are displayed.
A status bar shows the description pro-
cess of the driver card.
end country
:E
E AN
Fig. 32:
Current location information
3. Choose the country with the buttons
/ and confirm the selection with but-
ton .
Indicating the country at start of
IMPORTANT
If the country is not entered within a
minute, the card ejection is terminated.
4. Remove your driver card from the
card drawer.
This also applies for driver
changeovers in crew operation. Next,
insert your driver card into the other
drawer.
The display shows:
15:05 0km/h
123456.7km
Fig. 33:
Standard display without cards
5. If required, use the print menu to print
out the saved activities and events.
Second menu level – menu func-
Service Only!