5
Operation by the driver
Setting activities
54
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
Example:
You have selected the
Counter
and
are switching the ignition off.
When switching on the ignition, the
Counter
is displayed again after
5 seconds.
► Recording activities manually
IMPORTANT
Observe Regulation.
According to Regulation
(EU) 165/2014, activities which cannot
be recorded on the driver card must be
added manually.
In the following cases, activities must be
recorded manually:
• In case of a faulty DTCO 4.0
• In case of loss, theft, damage or mal-
function of the driver card
In these cases, you must create a daily
printout on the DTCO 4.0 at the start and
at the end of the journey or shift.
On the back of the printout, you can add
your activities manually and complete
the printout with personal details.
Fig. 30:
Manual recording of activities
Symbol meanings
First and last name
Number of the driver card or
the driving licence
No .
Vehicle registration number
Location at the beginning of
the shift
Location at the end of the
shift
km
Odometer reading at the
end of the shift
km
Odometer reading at the be-
ginning of the shift
km
Kilometres travelled
Date
Date
Sig.
Personal signature
IMPORTANT
Please observe the legal requirements
applicable in your country.
Service Only!