![background image](http://html1.mh-extra.com/html/raymond-weil/quartz-chronograph-watch/quartz-chronograph-watch_instructions-for-use_4003371001.webp)
I N S T R U C T I O N S F O R U S E
Q U A R T Z C H R O N O G R A P H
W A T C H E S
INTRODUCTION
e congratulate you on having chosen a watch
W
from the prestigious RAYMOND WEIL collection,
the living expression of masterful design and of
the continuous quest for top quality, which have been the
hallmarks of the Brand since its creation.
Your RAYMOND WEIL watch is fitted with a high-quality
chronograph quartz movement. A quartz watch enjoys
the advantage of being extremely precise.
In order to guarantee the perfect functioning of your
RAYMOND WEIL watch for many long years, we thank
you to pay close attention to the advice contained in
these Instructions for Use as well as in the International
Guarantee booklet.
RAYMOND WEIL S.A.
Avenue Eugène-Lance 36-38
P.O. Box 1569
1211 Geneva 26
Switzerland
Tel: +41 (0) 22 884 00 55
Fax: +41 (0) 22 884 00 50
G E N E R A L
I N F O R M A T I O N
A F T E R
S A L E S
S E R V I C E
W E B S I T E
www.raymondweil.com
DESCRIPTION OF THE DIAL
WATCH HANDS
HOUR
MINUTE
SECONDS
HAND
HAND
HAND
PUSH-BUTTON
A
:
- START
- STOP
SETTING CROWN
PUSH-BUTTON
B
:
-ZERO RESET
-INTERMEDIATE TIMING
DATE
30 MINUTES
60 SECONDS
1/10 SECOND
COUNTER
COUNTER
COUNTER
(hours counter
after 30 minutes)
CHRONOGRAPH HANDS
Certain RAYMOND WEIL chronographs are also equipped
with a tachometric scale, enabling the measurement of
speed in km/hr or other units.
CHANGING THE DATE AND SETTING THE TIME
1
Normal position
2
Rapid date change
3
Time-setting
Your RAYMOND WEIL watch may be fitted with a
screw-down crown. Before setting the time or changing
the date, it is therefore necessary to unscrew the crown
by pulling it straight out and turning it anti-clockwise.
The crown will then be released by a spring. After
completing all settings, press lightly on the crown,
while turning it clockwise, and screw it back in gently
in order to preserve your watch’s water-resistance.
CHANGING THE DATE
In order to adjust the date rapidly, pull the crown out to
position
2
. Then, depending on the model of your watch,
turn the crown forwards or backwards until the desired
date appears in the window. The date changes as the hour
hand passes midnight. During this operation, your watch
will continue to function and so will not need to be reset.
After finishing your changes, always push the crown
back in to position
1
, in order to preserve your watch’s
water-resistance.
SETTING THE TIME
In order to adjust the time, pull the crown out to position
3
and turn it forwards or backwards until the hands indicate
the desired time.
After setting the time, always push the crown back in to
position
1
, in order to restart the hands and to preserve
your watch’s water-resistance.
1/2