![background image](http://html.mh-extra.com/html/vdo/cancockpit-series/cancockpit-series_product-manual_858176074.webp)
This information is already
known from the „Add Display“
configuration.
1. Step: Overwrite the name from „General“ to
„Fuel Temperature“
4. Step: Select the appropriate Symbol for „Fuel
Temperature“ from a list of predefined, standardized
Symbols by clicking to the Symbol select button and
role up or down in the pull-down-list.
3. Step: Choose the Unit (km/h, °C, h,…) for the Display
2. Step: Select the requested Trailing digits for the
particular device. Will be visible on the Master Display.
5. Step: Enter any descriptive text which shows up
later in the Master Display.
6. Step: By selection of a Hysteresis-value an
interval which helps to stabilize the display of the
physical value in the Master Display is defined.
If a Symbol
cannot
be found
amongst the predefined list
of Symbols, this particular
one can be created new
through the use of the
"
ICON Editor"
. The ICON
Editor is started up by "Edit
– ICON Editor".
This dialog is closed by
selection of another device
Master, Satellite or Display in
the
"Navigation-Window"
June 2009
Training WinGauge Software
page 22
Summary of Contents for CANcockpit Series
